AN-S2 is a passive device designed to convert the primary current output of a moving-coil (MC) cartridge into a high-voltage, low-current signal of sufficient strength for a moving-magnet (MM) phono stage to amplify it to an appropriate level.
The internal transformers used in AN-S2 are manufactured exclusively by Audio Note (UK), utilizing the finest, most costly core materials and winding techniques, and are housed in Mu-metal shielding cans to minimize noise and interference.
AN-S2 is available in two versions: AN-S2/L (low impedance) and AN-S2/H (high impedance).
The “L” version features switchable input impedances of 3 ohms and 12 ohms. The “H” version: 15 ohms and 60 ohms.
The 3-ohm input on the “L” version is primarily intended for use with Audio Note IO moving-coil cartridges, while the 12-ohm input is designed for cartridges with an internal impedance of approximately 3–4 ohms.
The 15-ohm input on the “H” version is designed for use with cartridges having an internal impedance of approximately 4 to 5 ohms; the 60-ohm input is specifically designed for cartridges with an internal impedance in the 15 to 20-ohm range.
Our transformer can be used with cartridges that have higher internal impedance or values outside the preferred range of the switchable inputs; however, it is important to note that the input impedance should generally be three to four times the cartridge’s internal impedance to achieve the best results.
Technical specifications
Input impedance: see above.
Output impedance 47 kΩ
Channel balance +/- 0.3dB
Internal wiring: 99.99% pure copper
Unit weight
Unit dimension
Note: Due to Audio Note (UK)’s ongoing research and development program, specifications are subject to change without notice.
