STEALTH AUDIO VARIDIG V16 STANDARD DIGITAL AES/EBU DIGITAL CABLE

VARIDIG V16 STANDARD DIGITAL AES/EBU

VARIDIG V16 STANDARD DIGITAL AES/EBU Varidig V16 is new in the 2016 revision* of the “original” Varidig.

Varidig (short for VARIable DIGital) is our proprietary (patent pending) technology. Varidig differs from any other digital cable on the market because its porous Teflon® dielectric is thicker in the middle of the cable than at the ends. The diagram below shows the geometry of the internal conductor assembly of the AES/EBU Varidig, illustrating the concept and technology: Note that the diameter decreases as the conductor approaches the end (terminal point); the twist pitch also varies along the cable – this greatly helps reduce internal resonance in the cable.

This special dielectric geometry eliminates impedance mismatch at critical points (where terminals connect to the wire, i.e., between inherently low-impedance RCA terminals, or still far from the 110-ohm XLR with the wire itself), allowing for proper matching. The characteristic impedance of the entire wire, including the terminals (75 ohms for S/PDIF, 110 ohms for AES/EBU), is significantly reduced, thus greatly minimizing signal reflections within the wire. This Varidig technology works equally well with both S/PDIF and AES/EBU configurations. For more detailed information on the Varidig design, please see our technical notes.

Brand

STEALTH AUDIO

"Latest technology" in high-end audio cabling is our focus on STEALTH audio cables. This is achieved by perfecting every design element: using highly sophisticated non-resonant and impedance matching, multi-layer and multi-core cable geometries, and state-of-the-art conductive media: carbon fiber-based conductive composites, high-purity silver and pure solid gold wire, single-crystal metal alloys, and most exotically: amorphous metal alloys. Our top-of-the-line cables use helium as the dielectric and terminate in cost-free custom proprietary connectors with solid silver contacts, Kevlar composite inserts for enhanced strength, ultra-modified PTFE bodies, enclosed in a carbon fiber shell, and reinforced with machined titanium alloy.

相關產品